BUY BRASS BARBED HOSE COUPLINGS ONLINE - CODE NO. 4523
Male and female hose barb 1/8" through 1". N.P.T. ends.
BUY FEMALE GROUND JOINT "BOSS" WASHER TYPE HOSE COUPLINGS ONLINE - CODE NO. 4518
"G-J BOSS" Ground-Joint Female Coupling. Ground-joint soft-to-hard metal union between stem
head and spud provides perfect seal. Sizes 1/4" to 6" including 5".
BUY FEMALE GROUND JOINT "BOSS" WASHER TYPE HOSE COUPLINGS ONLINE - CODE NO. 4518
Same construction and sizes as above except that washer replaces ground-joint union between
stem and spud.
BUY "BOSS" AIR HAMMER HOSE COUPLINGS ONLINE - CODE NO. 4518
Ground joint or washer type. For rock drilling and other heavy-duty service.
BUY QUICK-ACTING UNIVERSAL HOSE COUPLINGS ONLINE - CODE NO. 4566
For compressors and air tools. Sizes l/4" to l". Hose ends; male and female N.P. T. ends; blank
ends; triple connections.
BUY FOUR-LUG "AIR KING" HOSE COUPLINGS ONLINE - CODE NO. 4566
For larger size hose - l-1/4", l-1/2" and 2". Hose ends;
female I.P.T. ends. | |
BUY INTERLOCKING 2 or 4 BOLT HOSE CLAMPS ONLINE - CODE NO. 4520
For use with Boss, Air King, or Universal couplings.
BUY SUCTION OR DISCHARGE HOSE SHANK COUPLERS ONLINE - CODE NO. 4529
For suction or discharge hose. Sizes l" to 8". Malleable iron, brass, aluminum or combinations of
both. Also available in special metals.
BUY STAINLESS STEEL OR HARDENED STEEL WORM GEAR HOSE CLAMPS ONLINE - CODE NO. 4585
The finest reusable worm gear clamps made. For air, gas and fluid hose lines. Method of attaching
the screw housing to band on all standard size clamps, provides extra strength under tension. No
welds or rivets. Available either in all stainless steel or with plated, case hardened screws.
Hose menders are used to repair broken hoses or
to permanently connect two hoses of the same
size. Hose is pushed over mender and worm gear
clamps or band type clamps are tightened over
outside of hose to secure mender. Available in sizes from 1/2IN to 12IN.
|
BUY OPEN END OR PREFORMED STYLE BAND HOSE CLAMPS ONLINE - CODE NO. 4515
BUY PREFORMED STYLE BAND HOSE CLAMP APPLICATOR TOOLS ONLINE
|
 
Two types, pre-formed style, double wrapped to slide on
hose before tightening. Open end style can be put around
hose from side - single
wrap. Variation of
pre-formed type in
galvanized steel, or
stainless. Sizes from
13/16" to 6" I.D.
Applicator tools and
remover cutters
available.
|
BUY IRON FOOT VALVES AND STEEL STRAINERS ONLINE - CODE NO. 4540
 | Valves prevent loss of pump prime and stainers prevent objects
from clogging suction hose and/or damaging pump.
Foot valves - 1-1/4" to 8". Strainers - 1-1/2" to 12". |
BUY BRASS BALL VALVES ONLINE - CODE NO. 5090
SELF-HONING AIR THROTTLE VALVES CODE NO. 4581
 | Brass Ball Valves are available with female pipe thread
on both ends -sizes from 1/4 to 4IN Self-adjusting, quick-opening, full-flow. Male thread
both ends. 1/4" through 1-1/2". Female thread both
ends 1/4" through 3".
|
BUY SPRING ACTION QUICK CONNECT DISCONNECT HOSE COUPLERS ONLINE - CODE NO. 4560
 | Pneumatic and hydraulic all sizes, all metals. Most styles available in Steel, Brass, or Stainless Steel.
|
- PIPE THREAD
Male Pipe Thread
Female Pipe Thread
Male Pipe Swivel
- 37° FLARE
Male 37° JIC Flare
Female 37° JIC Swivel
- O-RING
Male Straight Thread
O-Ring Swivel
- STAKE-O COUPLING
Stake-O Coupling for Mine Applications
- FLANGE HEAD
O-Ring Stnd. Pres. Code 61
O-Ring High Pres. Code 62
- 45° FLARE
Male 45° SAE Flare
Female 45° SAE Flare Swivel
- HI-SEAL
Male Hi-Seal
Female Hi-Seal Swivel
- INVERTED FLARE
Inverted Flare Male Swivel
Female Inverted Flare
