1-7/8" Deep Square Nose
Disc-O Tread Design Stair Tread Products
|
Part 787/2178-7 - Disc-O Tread Design Stair Treads
|
Part GS787/2178-8 - Grit Strip Disc-O Tread Design Stair Treads
|
Part GS787VI/2178-9 - Visually Impaired Grit-Strip Disc-O Tread Design Stair Treads
|
Recommended Uses:
- Ideal for public buildings where fire-safety is a prime prerequisite
- Durable for heavy traffic areas.
Features:
- Square Nose available in 10 colors
- ATTN: If precise color matching is critical, contact us first for a sample
- Available with two 3/4" wide, long wearing mineral coated Grit Strips recessed the full length of the tread at impact area
(Part GS787/2178-8 only)
- Design surface with Grit Strips offer added safety and
longer wear
- Available with a 2" wide, long wearing mineral coated Grit Strip recessed the full length of the tread at impact area
for the Visually Impaired (Part GS787VI/2178-9 only)
- New Design Nose - easily adjusts and adheres to steps with return angle nosings between 90 degrees and 60 degrees
- Circular discs (3/4" diameter) are easy to clean
- Affords safer pedestrian traffic
- Designed for safety or aesthetics
- All treads have color through entire thickness
- Longer adjustable nose to fit pan filled, molded concrete or terrazzo steps
- Meets Federal Specs. RR-T-650E and ZZ-T-001237(GSA-FSS).
- Install with No. 400 Neoprene Contact Adhesive, back of tread and back of nosing
- Use No. 110 Epoxy Stair Caulk inside of nose.
Specifications:
- 1/4" thick tapering to back edge; 12-1/2" deep
- Treads shall have a Flame Spread Rating of 25 or less using ASTM-E-84 Test
- An adjustable square nose (1-7/8" deep)
- Available with two black 3/4" wide abrasive Grit Strips inlaid in tread, 1" from front edge
(Part GS787/2178-8 only)
- Available with a Black 2" wide abrasive Grit-Strip inlaid in tread, 1" from front edge
for the Visually Impaired (Part GS787VI/2178-9 only)
- A sanded back to assure proper adhesion
Contains no asbestos fiber
- Made of top quality homogenous rubber compound, color extending throughout thickness
- Free from objectionable odors or imperfections which might impair serviceability
- Standard Lengths Available: 36", 42", 48", 54", 60", 72"
Shop Online for:
Rubber Disc-O Tread Design Floor Tile
|
|
 |
|
|
|
Part 788/2278-8 Rubber Disc-O
Tread
Design Floor Tile |
|
Recommended Uses:
- Ideal for stair landings, entryways, hallways, lobbies, elevators, ramps, concession stands and vending machines.
- Any heavy traffic area.
Features:
- Unique floor tile with raised circular discs (3/4" diameter), for better traction
- Available in 10 colors
- Circular discs allow for easy cleaning
- Attractive, non-staining and non-discoloring
- Factory cut 24" x 24" square tiles mean quick installation, fewer joints
Specifications:
- 3/16" thick
- 24" x 24" square tile size
- Weight approximately 5 lbs/tile
- Tile shall have a Flame Spread Rating of 25 or less using ASTM-E-84
Test
- Tile shall have a sanded back to assure proper adhesion
- Contains no asbestos fiber
- Made of top quality properly cured homogenous rubber compound, color extending throughout thickness
- Free from objectionable odors or imperfections which might impair serviceability
- ATTN: If precise color matching is critical, contact us first for a sample
Shop Online for
Rubber Disc-O Riser Stair Risers
|
 |
Part 789-CR/2278-9
-
7" high molded coved risers
-
Same standard lengths and colors as stair treads
-
Risers have a 5/8" toe, are approximately 1/8" thick
-
ATTN: If precise color matching is critical, contact us first for a sample
|
Shop Online for:
Rubber Disc-O Flat Risers and Stringers
|
 |
Part 786-R/2278-6
-
Smooth flat risers and stringers of same compound as Disc O Treads
-
1/8" thick
-
ATTN: If precise color matching is critical, contact us first for a sample
|
Shop Online for:
|
Shop Online
for Rubber
Disc-O Tread Design Stair Treads, Floor Tile, Risers and Stringers in the Ace Hose and Rubber Company Shopping Cart.
Or contact us. We're here to help you!
Browse Our Product Catalog
|
