Special Purpose Hoses
Airless Paint Spray Hose Assembly
Nylon tube, chemical and solvent resistant.
Polyester reinforcement and Polyurethane cover.
Dissipates static charge.
Assembly includes IPT female couplings and spring guards.
Lightweight and flexible static conductive hose for airless paint spray.
Temperature range 0 Deg F to 200 Deg F.
Sizes Available
ID 1/4in. at 3300# 25ft w/ cplgs
ID 1/4in. at 3300# 50ft w/ cplgs
Gunite Hose
Black Gum rubber tube reinforced with high tensile cord.
Non-marking yellow cover and an imbedded static wire.
Couplings are internally expanded steel, Victaulic or IPT.
Designed for pumping dry sand and cement.
All hoses work at 150# of pressure.
Available in 50ft or 100ft lengths only.
Sizes Available
ID 1-1/4in. 4-ply.
ID 1-1/4in. 4-ply couplings
ID 1-1/2in. 4-ply
ID 1-1/2in. 4-ply couplings
ID 2in. 4-ply
ID 2in. 4-ply couplings
Plaster/Grout Hose
Black abrasion resistant SBR rubber
tube, spiral plies of high-strength polyester.
Cover is abrasion and ozone resistant
rubber.
Couplings are internally expanded steel,
Victaulic or IPT.
Heavy duty plaster and grout, or cement
discharge hose.
Easy to handle and kink resistant.
All hoses work at 800# of pressure
except 4" ID.
Available in 50ft or 100 ft lengths
only.
Sizes Available
ID 1in. 2-ply
ID 1in. 2-ply couplings
ID 1-1/4in. 2-ply.
ID 1-1/4in. 2-ply couplings
ID 1-1/2in. 4-ply
ID 1-1/2in. 4-ply couplings
ID 2in. 4-ply
ID 2in. 4-ply couplings
ID 2-1/2in. 4-ply
ID 2-1/2in. 4-ply couplings
ID 3in. 4-ply
ID 3in. 4-ply couplings
ID 4in. 4-ply 700# W/P
ID 4in. 4-ply 700# W/P couplings
Sand Blast Hose
1/4" thick abrasion resistant static-conducting tube.
Reinforced with spiral polyester cord.
Black abrasion resistant rubber cover.
For conducting sand, steel, shot or other sharp abrasives at high velocity.
All hoses are 2-braid with 150# of pressure.
Available in 25ft, 50ft, or 100ft lengths only.
Sizes Available
ID 1/2in. OD 1-1/16in.
ID 3/4in. OD 1-1/2in.
ID 1in. OD 1-7/8in.
ID 1-1/4in. OD 2-5/32in.
ID 1-1/2in. OD 2-3/8in.
ID 2in. OD 2-7/8in.
These couplings slip over OD of hose and are mounted with several flat head screws through holes in coupling shell.
Available in 3/4IN, 1IN, 1 1/4IN and 1
1/2IN
Sizes Available
3/4in.
1in.
1-1/4in.
1-1/2in.
Sewer Hose
Male X Male end fittings.
100% pressure tested.
Yellow olefin tube.
Single high tensile braid reinforcement.
Orange polyether-urethane cover.
Temperature Range: -40 Deg F to 122 Deg F.
Upon request available in lengths up to 1000ft.
Hose
Hose
Hose
Hose
Max
Min
Min
Cover
Weight
SP - 10
Orange
0.625
0.960
2,500
6,250
4"
0.050
0.19
SP - 12
Orange
0.750
1.180
2,500
6,250
5"
0.070
0.28
SP - 16
Orange
1.000
1.460
2,500
6,250
6"
0.065
0.40
SP - 20
Orange
1.260
1.800
2,500
6,250
8"
0.095
0.59
The use of end fittings and assembly tooling other than that supplied by Ace Hose Products is at the risk of the user.
Sizes Available
5/8in. ID
5/8in. ID x 400ft
5/8in. ID x 500ft
5/8in. ID x 600ft
3/4in. ID
3/4in. ID x 400ft
3/4in. ID x 500ft
3/4in. ID x 600ft
1in. ID
1in. ID x 400ft
1in. ID x 500ft
1in. ID x 600ft
1-1/4in. ID
1-1/4in. ID x 400ft
1-1/4in. ID x 500ft
1-1/4in. ID x 600ft
Steam Hose
250# Steam Hose
Service: For maximum safety in conducting steam up to 450 Deg F
Construction: EPDM, heat resistant tube,
Reinforced with two braids of steel wire,
EPDM cover compounded for maximum heat resistance.
Available in Red or Black Cover.
Available in 25ft or 50ft lengths with Male Boss couplings on each end or with a male Boss on one end and a female Ground Joint Boss Coupling on the other end.
Couplings are attached with heavy bolt type clamps.
Also available in oil resistant cover, call for pricing.
Sizes Available
1/2x25ft MM
1/2x25ft MF
1/2x50ft MM
1/2x50ft MF
3/4x25ft MM
3/4x25ft MF
3/4x50ft MM
3/4x50ft MF
1x25ft MM
1x25ft MF
1x50ft MM
1x50ft MF
1-1/4x25ft MM
1-1/4x25ft MF
1-1/4x50ft MM
1-1/4x50ft MF
1-1/2x25ft MM
1-1/2x25ft MF
1-1/2x50ft MM
1-1/2x50ft MF
2x25ft MM
2x25ft MF
2x50ft MM
2x50ft MF
Steam Cleaner Hose Assembly
Tube specially compounded for resistance to cleaning agents and detergents.
Reinforced with braided steel wire.
Black heat and oil resistant cover.
Medium pressure, flexible hose for steam cleaning operations and saturated steam use to 325 Deg F.
Assembly includes steel males attached with 2-bolt clamps.
Sizes Available
ID 3/8in. w/ 1W braid
ID 3/8in. w/ 1W braid 25ft assembly
ID 3/8in. w/ 1W braid 50ft assembly
ID 1/2in. w/ 1W braid
ID 1/2in. w/ 1W braid 25ft assembly
ID 1/2in. w/ 1W braid 50ft assembly
Twin Welding Hose Assembly
One line red and one green bonded together for easy handling.
Coupled with 9/16-18 females both ends.
Dual-line hose for oxygen acetylene service.
Meets RMA spec.
Type VD, Grade R.
These are 1-braid with 200# of pressure.
Sizes Available
ID 1/4in. 25ft w/ cplgs.
ID 1/4in. 50ft w/ cplgs.
ID 3/8in. 25ft w/ cplgs.
ID 3/8in. 50ft w/ cplgs.
Ventilation and Blower Duct Hose
Expanded wire pitch for excellent compressibility and minimum storage.
Yellow PVC impregnated polyester Ducting with a black wear strip.
Standard lengths supplied with plain cut ends.
Used with portable blowers and heaters, ventilation and fume removal equipment.
Temperature range -20 Deg F to 180 Deg F.
Available in standard lengths of 15ft or 25ft.
Sizes Available
ID 6in.x15ft
ID 6in.x25ft
ID 8in.x15ft
ID 8in.x25ft
ID 10in.x15ft
ID 10in.x25ft
ID 12in.x15ft
ID 12in.x25ft
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
