|
Shop Online for:
Part 400/2564 - Neoprene Contact Adhesive |
Recommended Uses:
- For bonding to all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo step
Features:
- A rapid drying, long range contact cement
- Specially formulated for Ace stair coverings
- Brush on application; use on back of treads and back of nosing
- Contains solvents, extremely flammable
- 1 gallon covers 75 lineal feet of stair treads (brush on back of tread and step)
- Ready to use in 1 quart, 1 gallon and 4 gallon containers.
|
|
Shop Online for:
Part 775 - Epoxy Flooring Adhesive
|
Recommended Uses:
- The only recommended adhesive for use with Disc-O-Tile
- Because of flame spread properties, other adhesives will not bond Disc-O-Tile to the floor
- May be used with other rubber stair treads, tile and flooring
Features:
- A two-part solvent-free adhesive
- Contains 1 can Part A 1 can Part B, and a stirring paddle
- Covers approximately 150 square feet per unit
- Approximately 13 lbs. each unit
|
|
Shop Online for:
Part 560 - Rubber Flooring Adhesive |
Recommended Uses:
- For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors
- Not recommended where excessive moisture exists
- May also be used with sanded back molded rubber stair treads
Features:
- Environmentally Friendly
- Non-Carcinogenic
- Non-Toxic
- Safe for the environment and freeze thaw stable
- See label for complete instructions
- Ready to trowel in 1 gallon or 4 gallon cans
- Covers 150 square feet per gallon
|
|
Shop Online for:
Part 110/2565 - Epoxy Nose Caulk |
Recommended Uses:
- Recommended for all Stair Tread installations
- Nose Caulk is necessary when installing Adjusta-Nose
treads or when the step nosing is broken, worn or rounded
- Nose Caulk can also be used to repair the top surface of
the step
Features:
- This two-part Epoxy Caulk will fill voids at the nose of the step and give needed support underneath the stair tread nose
- Two-part mixture in quart units (mixing instructions on label) or in 13.5 oz. Dual-Cartridge
- saves time, labor, mess and cleanup as caulk mixes in nozzle as it is dispensed
- Dual-Cartridge for use with our professional
Dual-Cartridge Dispensers ECD-26 or ECD-18
- Dual-Cartridge yields approx. 50 lin. ft. of 1/4" bead
- Quart unit yields approximately 75 ft
- Product is environmentally friendly
|
|
Shop Online for:
Part 300/2564 - Stair Tread Adhesive |
Recommended Uses:
- A water-based contact adhesive for bonding rubber and vinyl stair treads and risers to concrete, wood, terrazzo, metal or marble
Features:
- Brush on application; use on back of treads and back of nosing
- 1 gallon covers 75 lineal feet of stair treads (brush on back of
tread and step)
- Ready to use in 1 quart, 1 gallon and 4 gallon containers
- 4 Gal pails can not ship via UPS or FedEx Ground.
|
