Thermo Plastic 100R7 Hydraulic Hose - Male x Male NPT
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic systems use perforated (pin-pricked) hose.
Innercore: Synthetic oil resistant polyester tube
Reinforcement: Braided high tensile synthetic fiber
Cover: Black high abrasion resistant polyurethane
Temperature Range: -65° F to +212° F (-54° C to +100° C)
Color: Black
Also available in higher pressure 100R8
Also available in Non-conductive Orange
Hose
Part
Number
Nominal
I.D.
Nominal
O.D.
Maximum
Operating
Pressure
Minimum
Burst
Pressure
Min.
Bend
Radius
(in.)
Wgt.
Per
100
ft
(lbs)
in.
mm
in.
mm
psi
bar
psi
bar
711-03
3/16
4.76
.405
10.29
3,250
224
13,000
896
3/4
5.5
711-04
1/4
6.35
.505
12.83
3,000
207
12,000
827
1-1/4
7.0
711-05
5/16
7.94
.585
14.86
2,500
172
10,000
689
1-3/4
10.0
711-06
3/8
9.53
.645
16.38
2,250
155
9,000
620
2
10.5
711-08
1/2
12.70
.810
20.57
2,000
138
8,000
552
3
15.0
711-12
3/4
19.05
1.11
28.19
1,250
86
5,000
345
9-1/2
29.0
711-16
1
25.40
1.42
36.07
1,000
69
4,000
276
12
40.0
Sizes Available
Thermo Plastic 100R7 Hydraulic Hoses -Female X Female
JIC
Thermo Plastic 100R7 Hydraulic Hose - Female x
Female JIC
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic systems use perforated (pin-pricked) hose.
Innercore: Synthetic oil resistant polyester tube
Reinforcement: Braided high tensile synthetic fiber
Cover: Black high abrasion resistant polyurethane
Temperature Range: -65° F to +212° F (-54° C to +100° C)
Color: Black
Also available in higher pressure 100R8
Also available in Non-conductive Orange
Hose
Part
Number
Nominal
I.D.
Nominal
O.D.
Maximum
Operating
Pressure
Minimum
Burst
Pressure
Min.
Bend
Radius
(in.)
Wgt.
Per
100
ft
(lbs)
in.
mm
in.
mm
psi
bar
psi
bar
711-03
3/16
4.76
.405
10.29
3,250
224
13,000
896
3/4
5.5
711-04
1/4
6.35
.505
12.83
3,000
207
12,000
827
1-1/4
7.0
711-05
5/16
7.94
.585
14.86
2,500
172
10,000
689
1-3/4
10.0
711-06
3/8
9.53
.645
16.38
2,250
155
9,000
620
2
10.5
711-08
1/2
12.70
.810
20.57
2,000
138
8,000
552
3
15.0
711-12
3/4
19.05
1.11
28.19
1,250
86
5,000
345
9-1/2
29.0
711-16
1
25.40
1.42
36.07
1,000
69
4,000
276
12
40.0
Sizes Available
Thermo Plastic 100R7 Twin Hydraulic Hose, Female x Female JIC
Thermo Plastic 100R7 Twin Hydraulic Hose, Female x Female JIC
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic systems use perforated (pin-pricked) hose.
Innercore: Synthetic oil resistant polyester tube
Reinforcement: Braided high tensile synthetic fiber
Cover: Black high abrasion resistant polyurethane
Temperature Range: -65° F to +212° F (-54° C to +100° C)
Color: Black
Also available in higher pressure 100R8
Also available in Non-conductive Orange
Assemblies coupled with Female JIC-6 swivel ends.
R7T-05 is 5/16ID x .590" OD, R7T-06 is 3/8ID x .665" OD
Aeromat® is a registered trademark of the Aeromat Corporation
LITE-STEP® is a registered trademark of Ace Hose and Rubber Company
KOROLITE® is a registered trademark of Ace Hose and Rubber Company
.jpg)
.jpg)
.jpg)
