Brass Push-In Fittings - Male Connectors

Brass Push-In Fittings – Male Connectors

$5.35 – $16.10

  • Quick Connect: simply push tubing in, no tools required. Saves up to 75% of assembly time of standard compression fittings.
  • Quick Disconnect: hold two fingers on insert and pull tubing out. No tools required.
  • Reusable: connect and disconnect numerous times.
  • Full flow design provides up to 60% more flow than conventional fittings with internal tube supports.
  • Positive Seal: no leaks, after tubing is inserted, seal is made secure tube retention-pulling on tubing only serves to tighten the connection.
  • Pre-applied PTFE based pipe sealant on all male pipe threads saves customer additional labor.
  • Working Pressure: fittings are suitable for use up to the maximum working pressure of the plastic tubing used. Also suitable for vacuum service.
  • Working Temperature: -10°F to 200°F
    Part
    Number    		 Tube
    OD    		 Male
    NPTF
    684×10 1/8″ 10-32*
    684×4 1/8″ 1/8″
    685×10 5/32″ 10-32*
    685×4 5/32″ 1/8″
    685×8 5/32″ 1/4″
    686×10 3/16″ 10-32*
    686×4 3/16″ 1/8″
    688×10 1/4″ 10-32*
    688×4 1/4″ 1/8″
    688×8 1/4″ 1/4″
    688×12 1/4″ 3/8″
    6812×4 3/8″ 1/8″
    6812×8 3/8″ 1/4″
    6812×12 3/8″ 3/8″
    6812×16 3/8″ 1/2″
    6816×8 1/2″ 1/4″
    6816×12 1/2″ 3/8″
    6816×16 1/2″ 1/2″
    *UNF – Straight thread
    Supplied with gasket
  • Also avaible in Stainless Steel and Nickle Plated Brass.
  • For larger quantities, call for discount.
    • Category: SKU: SKUACEHOSE425

    Related products