Brass Push-In Fittings – Male Swivel Run Tees


  • Quick Connect: simply push tubing in, no tools required. Saves up to 75% of assembly time of standard compression fittings.
  • Quick Disconnect: hold two fingers on insert and pull tubing out. No tools required.
  • Reusable: connect and disconnect numerous times.
  • Full flow design provides up to 60% more flow than conventional fittings with internal tube supports.
  • Positive Seal: no leaks, after tubing is inserted, seal is made secure tube retention-pulling on tubing only serves to tighten the connection.
  • Pre-applied PTFE based pipe sealant on all male pipe threads saves customer additional labor.
  • Working Pressure: fittings are suitable for use up to the maximum working pressure of the plastic tubing used. Also suitable for vacuum service.
  • Working Temperature: -10°F to 200°F
    71S4x4 1/8″ 1/8″
    71S5x10 5/32″ 10-32*
    71S5x4 5/32″ 1/8″
    71S8x4 1/4″ 1/8″
    71S8x8 1/4″ 1/4″
    71S12x8 3/8″ 1/4″
    71S12x12 3/8″ 3/8″
    71S16x12 1/2″ 3/8″
    71S16x16 1/2″ 1/2″
    *UNF – Straight thread
    Supplied with gasket
  • Category: SKU: SKUACEHOSE430